Error verifying dmi pool data update success

At this point, you must be wondering why I didn't contact Alienware for support: because I am not the original owner of the computer and Alienware refused to provide any information or any help about this computer. However, the computer was not able to recognize the drive at all, not even in BIOS. I changed BIOS settings many times, but without any success. I searched online for possible problems, but none seemed to help.

A few weeks ago, as I was trying something different to make the computer recognize the new hard drive, I removed 3 GB of ram from computer it has 4 1GB sticks and the hard drive was recognized right away.

I took this opportunity to install Windows Vista, I was able to boot to OS, I updated everything, using Windows update about 80 updates , installed Firefox with pluggins, and installed World of Warcraft. After that, I was playing World of Warcraft for over 3 hours, trying my new clean machine, then it froze completely. I was unable to restart it normally, so I did a hard boot pushed the power button on computer to restart it. I was able to play again a little longer, then again it froze. After this time, I was unable to access OS again.

I have gone to BIOS to find out if there is something wrong there again and to check if hard drive is detected, but I can see that hard drive is not detected at all. Update Success Then nothing, the computer will not boot as it previously did. I have checked the BIOS settings for boot options and it is set up to boot from Hard drive, but there is something preventing it from doing it, which I cannot figure it out.

Any help or suggestions will be greatly appreciated. I have tried using the Windows Vista to "repair" but then it does not detect the hard drive. I don't know what it could be causing this error. On another note, the computer sometimes detects the hard drive which is brand new and sometimes it does not. Of one of those times that it detected the hard drive, I installed Ubuntu OS, was working fine for a few hours, I updated the system, then it froze completely, I powered down the computer manually, then the hard drive was not recognized at all anymore.

At this point I don't know what it might be causing the problem, as sometimes the hard drive is detected, but most of the time is not. If I get lucky, I will be able to select either Ubuntu or Windows Vista both OS are installed on new hard drive , but in the past few weeks, I haven't been able to make the computer detect the HD. Any suggestions will be greatly appreciated.

Share Flag. All Answers. Collapse -. OK for starters here you need to test the HDD with. Col 0 Votes. Reply to OH Smeg. Update on HDD test. Avoid these Updates like the Plague.

Sounds like bad RAM. The shortcut for loading the BIOS default settings could be a function key such as F9 shown in the following screenshot. Then you will be asked if you're sure to load the defaults.

You can press Y on the keyboard for yes or arrow to the yes option. If resetting BIOS to the default values cannot help resolve your boot issues, you may also want to reset the configuration data. If not, you need to create a Windows installation USB drive which is very simple.

Then boot from the installation media. Select your language preferences, and click on Next button to continue. Then choose Repair your computer on the bottom left corner. Type bootrec. After trying above fixes, if your computer still freezes at the DMI message verifying DMI pool data, it may be a sign that one of your hardware components is malfunctioning. In this case, I suggest you perform a clean install.

Boot from the Windows installation USB drive. If you do not have one, create one with Windows Media Creation Tool. On the Windows setup page, choose language preferences, and then click Next to continue. Choose the operating system you want to install and click Next. Choose [Custom: Install Windows only advanced ] to perform a clean install. Then just follow the on-screen instructions to complete the clean install.

After trying the fixes in this post, I successfully fixed the verifying DMI pool data stuck when loading Windows operating system. If you have any question about how to fix Windows stuck at verifying DMI pool data error message, you can leave a message in the following comment zone and we will reply as soon as possible. If you have other better solutions, please share it with us.

If you need any help when using MiniTool software, you may contact us via [email protected]. Download Partition Wizard. Summary : If you come across verifying DMI pool data stuck when loading operating system, don't worry.

Read More. Note: In the bootable edition, every partition will be assigned as a drive letter, including system reserved partition. So the drive letter of every partition on your computer can be changed. Yes No. Sorry this didn't help. Thanks for your feedback. If it fails the test, replace it. If it passes the test, then there's probably nothing wrong with it. If it fails, test each chip individually to find those that are bad and replace them.

To do that, wait for the screen that tells you the F key to push to access the boot menu or boot setup. Push it quickly. Make the changes, save your work, and exit. Put the CD in the drive and reboot. When prompted, push any key to boot from the CD. If that doesn't resolve the problem, try the following: To run the Bootrec.

To do this, follow these steps:. Put the Windows Vista installation disc in the disc drive, and then start the computer. Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next. Click Repair your computer.

Click the operating system that you want to repair, and then click Next. Type Bootrec. By doing this, you make sure that the BCD is completely rebuilt. To do this, type the following commands at the Windows RE command prompt:.

I had an issue with the original hard drive it had, a GB drive, that for some reason it stopped working, at first appeared that hard drive died, but then I put it in an enclosure and it was working, but with limited access to certain files.

At this point, you must be wondering why I didn't contact Alienware for support: because I am not the original owner of the computer and Alienware refused to provide any information or any help about this computer. However, the computer was not able to recognize the drive at all, not even in BIOS.