How to repair spring balance windows

Next, you will need to choose the correct locking collar or cam. This collar allows the coil pack to expand in the jamb and lock into place so the sash can be tilted inwards. The color of the collar determines how much the coil pack expands. Below you can see an example of the differences in thickness.

Here you can see the differences in thickness between the locking collars. The blue collar is the thinnest, while the red collar is the thickest. Tandem or triple case simply refers to the number of coil packs that you have. Tandem would mean you have the base coil pack plus one additional pack for a total of two coils. Triple case means you have the base coil pack plus two additional packs for a total of three coils. For heavier window sashes, use Pullman standard balances.

X-Ray View of Spring Counterbalance. Weight Per Sash Lbs. Then slowly close the window. Remove the screws at the top of the balance and remove the balance. Repeat the process on the other side of the frame. You will now install the new balance by feeding it through the top of the lower sash.

Mount the balance to the frame. Repeat on the other side. Raise window and again hold open with a vise grip or similar clamp. In almost every case, the tilt in feature means the window is tilting inward towards the house, thereby allowing afternoon breezes in and an easier cleaning experience. Margaret Frigerio Reviewer. How do you remove tilt windows? Pull the top of the window sash towards you, tilting it into the room until it is horizontal. Lift up on one side of the tilt - out sash, while holding the other side of the sash stationary.

This will release the tilt - out window sash and allow you to remove it. Nazira Vollborn Reviewer. How do you remove an aluminum window? Removing the Fixed Panel of Glass. Nonito Ferrando Supporter. How do I fix my old windows? Repair a Wood Window in 12 Steps.

Step 1: Pre-treat, if needed. Step 2: Sand wood surfaces, if needed. All surfaces and arrises should feel smooth. Step 3: Prime the sash. Step 4: Sand primed surfaces, if needed. Step 5: Bed the pane. Step 6: Set glazing points.